Navigator 4WD V8-5.4L DOHC VIN A (2000)
NOTE: Refer to the Multiple-Piece Auxiliary A/C Heater Line Kit illustration in Description and Operation.
2. Connect the inlet line peanut fitting.
1
Connect the inlet lines.
2
Loosely install the nut.
3
Snap the peanut fitting into the torque retention bracket.
3. Install the inlet line.
^
Starting from the rear of the vehicle, insert the end with the orange tape between the frame and the body.
4. Connect the inlet line to the inlet line. Refer to illustration: Multiple-Piece Auxiliary A/C Heater Line Kit.
1
Connect the inlet lines.
2
Loosely install the nut.
5. Install the inlet line.
