Navigator 4WD V8-5.4L DOHC VIN A (2000)
11. Tighten the five peanut fittings.
12. Install the line brackets.
1
Position the bracket.
2
Install the nut.
3
Snap the line securely into the bracket.
CAUTION: Overtightening of the nut will cause the stud to break away from the floor pan.
NOTE: The bracket must be positioned equally between the white location marks on the line.
13. Install the muffler heat shield.
1
Position the shield
2
Install the nuts.
14. Lower the vehicle.
15. Turn the air suspension switch on, if equipped.
