Navigator 4WD V8-5.4L DOHC VIN A (2000)
Multiplex Communication Network: Service and Repair
Module Configuration
Customer Preference Items
NOTE:
^
If using the WDS, select Module Configuration and Programming, then follow the screen prompts.
^
Make sure module is listed as supporting customer preference items and supports the specific item to be configured in the Module Configuration
Index.
1. Select Service Bay Functions on the scan tool.
2. Select the module that contains the customer preference item to be programmed. Refer to the Module Configuration Index. See: Testing and
Inspection/Module Configuration/Scan Tool Testing/Module Configuration Index
3. Select Customer Preference Items on the scan tool.
4. Select Module Option Content.
5. Select the item to be enabled or disabled.
6. Enable or disable the item as necessary to reflect the customer preference.
Module Configuration - Anti-Theft Configure
NOTE:
^
If using the WDS, select Module Configuration and Programming, then follow the screen prompts.
^
Make sure module is listed as supporting anti-theft configure and supports the specific item to be configured in the Module Configuration Index.
1. Select Service Bay Functions on the scan tool.
2. Select the RAP module.
3. Select Anti-Theft Configure on the scan tool.
4. Select the item to be configured.
^
HORN CHIRP
^
PERSONALITY
^
AUTOLOCK/RELOCK
^
LED FLASH WHEN ARMED
5. Select the item to be enabled or disabled.
6. Enable or disable the item as necessary to reflect the customer preference.
