Navigator 4WD V8-5.4L DOHC VIN A (2000)
5. Remove the digital Transmission Range (TR) sensor.
1
Remove the bolts.
2
Remove the digital Transmission Range (TR) sensor.
Installation
1. Install the digital Transmission Range (TR) sensor.
1
Install digital Transmission Range (TR) sensor.
2
Loosely install the bolts.
2. Note: Make sure that the manual control lever is in the neutral position.
Install the TRS Alignment Gauge. The TRS Alignment Gauge is designed to fit snug.
3. Tighten the bolts.
