Navigator 4WD V8-5.4L DOHC VIN A (2000)
6. Separate the side air bag wire harness pin-type retainers from the seat back frame.
^
Pull any extra side air bag wire harness toward the side air bag to allow for removal.
NOTE: If the pin-type retainers are damaged, install new retainers. This will keep the wire harness routed correctly.
7. Remove the side air bag plastic shield.
8. Remove the side air bag module retaining nuts.
NOTE: If installing a new side air bag module, use new retaining nuts. If the same side air bag module is to be reused, then reuse the side air bag
module nuts.
9. Position the side air bag module and deployment chute away from the mounting bracket and seat back frame.
