Navigator 4WD V8-5.4L DOHC VIN A (2000)
7. Reposition the seat back pad and trim cover to the seat back frame.
8. Route the side air bag module wire harness and install the pin-type retainers.
NOTE: If the side air bag module wire harness pin-type retainers have become damaged, new retainers must be installed to ensure correct wire
routing.
9. Install the side air bag module plastic shield.
^
Check that the side air bag module plastic shield is correctly installed and secure.
10. Position the seat back trim cover back flap down.
11. Attach the seat back trim cover lower J-clips.
