Navigator 4WD V8-5.4L DOHC VIN A (2000)
WARNING: FRONT SEAT BACK TRIM COVERS INSTALLED ON SEATS EQUIPPED WITH SIDE AIR BAGS CANNOT BE
REPAIRED, THEY ARE TO BE REPLACED (CLEANING IS PERMISSIBLE).
4. Separate the seat back trim cover lower J-clips.
5. Position the seat back trim cover back flap up.
6. Separate the side air bag wire harness pin-type retainers from the seat back frame.
^
Pull any extra side air bag wire harness toward the side air bag to allow for removal.
NOTE: If the pin-type retainers are damaged, install new retainers. This will keep the wire harness routed correctly.
7. Remove the side air bag plastic shield.