Navigator 4WD V8-5.4L DOHC VIN A (2000)
1. Remove the side air bag from the vehicle.
2. Obtain two wires (20 gauge minimum) at least 6.1 meters (20 feet) long and attach one end of each wire to the connector pins on the air bag
module.
3. Place the air bag module on a flat surface in an open outdoor area with the tear seam facing upward and the attaching studs facing downward.
4. Remain at least 6.1 meters (20 feet) away from the air bag module.
5. Deploy the side air bag module by touching the other ends of the two wires to the terminals of a 12-volt battery.
6. To allow for cooling, wait at least ten minutes before approaching the deployed air bag.
7. Dispose of the deployed side air bag module in the same manner as any other part to be scrapped.
