Navigator 4WD V8-5.4L DOHC VIN A (2000)
Alignment: Service and Repair
Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straightforward" position by attaching a rigid link from the steering wheel to the brake
pedal.
3. Check the toe settings; follow the equipment manufacturer's instructions.
4. Hold the tie-rod end while loosening the toe set jam nuts.
5. Rotate the front wheel spindle tie-rod adjusting sleeve to desired position.
6. Note: Whenever the toe set jam nuts are loosened for toe adjustment, the nut and tie-rod threads must be cleaned and lubricated.
Tighten the jam nuts as follows:
