Navigator 4WD V8-5.4L DOHC VIN A (2000)
Center Link: Service and Repair
Removal and Installation
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Remove the steering sector shaft arm drag link castellated nuts.
1. Remove the cotter pins.
2. Remove the castellated nuts.
3. On 4x2 vehicles, remove the steering sector shaft arm drag link.
-
Use the special tool to separate the steering sector shaft arm drag link from the RH tie-rod end, the steering idler arm and bracket, the steering
gear sector shaft arm and the LH tie-rod end.
