Navigator 4WD V8-5.4L DOHC VIN A (2000)
Steering Gear: Service and Repair
Removal and Installation
Special Tool(s)
Removal
1. WARNING: The electrical power to the air suspension must be shut off prior to hoisting, jacking or towing an air suspension vehicle.
This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Remove the skid plates, if equipped.
1. Remove the bolts.
2. Remove the skid plate.
3. Slide back the plastic cover from the intermediate steering shaft to the steering gear.
