Navigator 4WD V8-5.4L DOHC VIN A (2000)
Note: The air spring solenoid has a two-stage pressure relief fitting similar to a radiator cap.
1. Raise and support the vehicle.
2. Disconnect the air spring solenoid electrical connector.
3. Disconnect the air spring solenoid air line.
-
Compress the quick connect locking ring and pull out the air line.
4. CAUTION: Remove any dirt or other debris from the air spring prior to removing the air spring solenoid from the air spring.
Remove the air spring solenoid clip.
5. Rotate the air spring solenoid out of the air spring to the first detent to release the air from the air spring.