Navigator 4WD V8-5.4L DOHC VIN A (2000)
8. Remove the seal.
Installation
1. Install the seal using the Knuckle Seal Replacer, the Threaded Drawbar and Bearing Cup Replacer.
2. Install the wheel hub.
1. Position the wheel hub on the front wheel driveshaft and joint and into the front wheel knuckle.
2. Install the wheel hub bolts.
3. Install the front brake anti-lock sensor.
1. Install the front brake anti-lock sensor into the wheel hub.
2. Install the front brake anti-lock sensor bolt.