Navigator 4WD V8-5.4L DOHC VIN A (2000)
5. Remove the brake disc shield.
1. Remove the bolts.
2. Remove the brake disc shield.
6. Remove the front brake anti-lock sensor.
1. Remove the bolt.
2. Remove the front brake anti-lock sensor.
7. CAUTION: Do not over-extend the CV joint and boots when removing the hub and bearing assembly.
Note: The CV joint is a slip fit into the wheel hub and bearing. A puller will not normally be required.
Remove the wheel hub.
1. Remove the bolts.
2. Push the CV joint inboard. Remove the wheel hub.
