Navigator 4WD V8-5.4L DOHC VIN A (2000)
1. After the torque converter has drained, install the drain plug.
2. Install the torque converter drain plug cover.
3. Note: Prior to installation, lightly lubricate the seal with clean MERCON Multipurpose (ATF) Transmission Fluid XT-2-QDX or equivalent
meeting Ford specification MERCON. MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per
TSB 06-14-4.
Press a new fluid filtered seal assembly into the pump bore until seated.
4. CAUTION: Mixing (A) 4x2-style and (B) 4x4-style transmission fluid filters and transmission pan assembly components can cause transmission
damage.
Install filter assembly and transmission pan.
