Navigator 4WD V8-5.4L DOHC VIN A (2000)
4. Secure the (A) High Lift Transmission Jack with the (B) E40D Transmission Jack Adapter to the (C) transmission.
5. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Raise the transmission jack until the (A) retainer studs are separated from the (B) transmission support crossmember.
6. Remove the (A) bolts and the (B) retainer.
Installation
1. Install the (A) retainer and the (B) bolts.
2. Lower the transmission jack while aligning the (A) retainer studs with the holes in the (B) transmission support crossmember. Allow the full
weight of the transmission to rest on the transmission support crossmember
