Navigator 4WD V8-5.4L DOHC VIN A (2000)
11. Lower and remove the valve body separator plate and gaskets.
-
The rubber check balls and the steel EPC check ball and spring assembly will fall out and may become lost or stick to the worm trail of the
case.
-
Remove and discard separator plate gaskets.
Installation
CAUTION: Using the incorrect gaskets can cause damage to the transmission.
1. Note: Refer to parts catalog for proper gasket usage.
Note: If the valve body separator plate was not removed, proceed to Step 6.
Note: Apply a light film of petroleum jelly to the valve body separator plate prior to assembling the new gaskets.
Assemble the new gaskets to the valve body separator plate.
1
Main control to case gasket.
2
Valve body separator plate.
3
Main control to separator plate gasket.