Navigator 4WD V8-5.4L DOHC VIN A (2000)
17. Position the differential assembly, including the differential bearing cups and differential bearing shims in the differential housing. Tighten bearing
caps to specification.
18. Position the special tool.
1
Rotate the differential case to verify that the differential bearings have seated correctly.
2
Position the special tool.
19. Measure the differential case runout.
-
If the runout does not exceed the specification, use the new differential bearings for assembly.
-
If the runout exceeds the specification, install a new differential case.
Installation
All vehicles
1. CAUTION: If installing a new anti-lock speed sensor ring, align the notch on the case flange and the tab on the anti-lock speed sensor ring.