Navigator 4WD V8-5.4L DOHC VIN A (2000)
8. Note: If a new bolt is unavailable, coat the threads with Threadlock and Sealer E0AZ-19554-AA or equivalent meeting Ford specification
WSK-M2G351-A5 prior to installation.
Install a new bolt finger-tight.
9. Using the special tool, install the new differential bearings.
10. CAUTION: If installing a new anti-rock speed sensor ring, align the notch on the case flange and the tab on the anti-lock speed sensor ring.
Position the differential ring gear, the anti-lock speed sensor ring, and the differential case. Align the bolt holes by starting two bolts through the
holes in the differential case and the differential ring gear. Press the new anti-lock speed sensor ring, if removed, and the differential ring gear on
the differential case.
11. Install the bolts.
-
Apply Stud and Bearing Mount E0AZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the bolt threads.
12. Install the differential assembly.
