Navigator 4WD V8-5.4L DOHC VIN A (2000)
7. Insert the differential pinion shaft, and install a new differential pinion shaft lock bolt finger-tight.
8. Press the new anti-lock speed sensor ring and the ring gear on the differential case.
-
The notch on the differential case flange and the notch on the anti-lock speed sensor ring must be aligned.
9. Install the ring gear bolts and tighten.
-
Apply Stud and Bearing Mount E0AZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the ring gear bolts.
10. Install the differential case.
Traction-LOK Differential Case and Ring Gear