Navigator 4WD V8-5.4L DOHC VIN A (2000)
3. Index-mark the front driveshaft to the axle universal joint flange.
4. CAUTION: Do not allow the driveshaft to hang unsupported.
Disconnect and support the front driveshaft.
1
Remove the four bolts.
2
Carefully disconnect and support the front driveshaft.
5. Using a Nm (inch/pound) torque wrench, measure the torque necessary to maintain pinion rotation. Record the measurement for reference during
installation.
6. Index-mark the axle universal joint flange to the pinion stem.
