Navigator 4WD V8-5.4L DOHC VIN A (2000)
Universal Joint: Service and Repair
Universal Joint -Single Cardan
Special Tools
Disassembly
1. Remove the driveshaft.
2. CAUTION: Do not clamp the driveshaft in the jaws of a vise or similar holding fixture.
Place the driveshaft on a suitable workbench, being careful not to damage the tube.
3. Note: If components are not marked and installed incorrectly, driveline imbalance can occur.
Mark the positions of the driveshaft components.
4. Clamp the C Frame & Screw in a vise.