Navigator 4WD V8-5.4L DOHC VIN A (2000)
17. Set the halfshaft assembled length to specification.
18. CAUTION: Do not damage the boot.
Insert a dull screwdriver blade under the boot to release the pressure.
19. Note: Tighten the through-bolt until the tool is in the closed position.
Using the special tool, install the two boot clamps.
20. Install the halfshaft in the vehicle.
Removal and Installation
Special Tools
Removal and Installation
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
