Navigator 4WD V8-5.4L DOHC VIN A (2000)
Liftgate Window Glass: Service and Repair
Moulding
REMOVAL
1. Remove the rear pivot arm. For additional information, refer to Wiper and Washer Systems.
2. Remove the rear wiper stop.
1
Remove the screws.
2
Remove the rear wiper stop.
3. Remove the liftgate window glass. For additional information, refer to Window Glass-Liftgate.
4. Peel back the top corners of the watershield and remove the plugs at the top corners.
5. Remove the liftgate window glass moulding.
1
Remove the five nuts.
2
Remove the moulding.
3
Disconnect the center hi-mount stop lamp electrical connector.