Navigator 4WD V8-5.4L DOHC VIN R (2001)
1. To install, reverse the removal procedure.
^
If necessary, use Multi-Purpose Grease F5AZ-19G209-AA (aerosol) or equivalent meeting Ford specification ESR-M1C159-A to lubricate the
latches.
^
Use the Heavy Duty Riveter to install the new rivets.
NOTE:
^
Make sure the latch release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
^
Install the rear door latch screw in the small opening first, followed by the large opening.
