Navigator 4WD V8-5.4L DOHC VIN R (2001)
1
Remove the four screw covers and four screws.
2
Remove the two A-pillar assist handles.
4. NOTE: Release the top attachments by pulling inboard first and then upward to release the lower hook.
Remove the two windshield side garnish mouldings.
-
If equipped, on the LH windshield side garnish moulding, disconnect the cellular phone hands-free microphone electrical connector.
5. Remove the coat hooks.
1
Open the access cover.
2
Insert a screwdriver into the slot and rotate.
3
Remove the coat hooks.
6. Remove the two front door scuff plates (13208).
7. Remove the two rear door scuff plates (13228).