Navigator 4WD V8-5.4L DOHC VIN R (2001)
^
Starting from the rear of the vehicle, install the end with the blue tape over the axle between the frame and the body.
2. Connect the heater outlet line (18663-C) peanut fitting.
1
Connect the outlet lines.
2
Loosely install the nut.
3. Install the heater outlet line (18663-D).
^
Starting from the rear of the vehicle, install the end with the red tape between the frame and the floor pan.
4. Connect the heater outlet line (18663-D) to the heater outlet line (18663-C).
1
Connect the fittings.
2
Loosely install the nut.
5. Install the heater outlet line (18663-E).
1
Remove RH rear wheel and tire.