lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3030 > < Initial Inspection and Diagnostic Overview|Page 3028
Page 3
background image

WARNING:  BLOCK THE FRONT AND REAR WHEELS, AND APPLY THE PARKING BRAKE AND THE SERVICE BRAKE, OR
INJURY TO PERSONNEL CAN RESULT.

CAUTION:  Limit engine running time to one minute or less with belts removed or serious engine damage will result.

NOTE:  A serpentine drive belt decreases the usefulness of this test. In these cases, use a Vibration Analyzer (VA), to pinpoint accessory
vibrations. An electronic listening device, such as an EngineEAR, will also help to identify noises from specific accessories.

^

Increase the engine rpm to where the concern occurs.

^

If the vibration/noise is duplicated when carrying out this test, the belts and accessories are not sources.

^

If the vibration/noise was not duplicated when carrying out this test, install each accessory belt, one at a time, to locate the source.

Initial Inspection and Diagnostic Overview|Page 3030 > < Initial Inspection and Diagnostic Overview|Page 3028