Navigator 4WD V8-5.4L DOHC VIN R (2001)
Oil Pick Up/Strainer: Service and Repair
Oil Pump Screen and Pickup Tube
Removal
1. Remove the oil pan.
2. Remove the three (A) bolts and the (B) oil pump screen cover and tube.
Installation
1. Clean and inspect the mating surfaces.
^
Inspect the O-ring seal,
2. CAUTION: Make sure the O-ring is in place and not damaged. A missing or damaged O-ring can cause foam in the lubrication system, low oil
pressure and severe engine damage.
NOTE: Clean and inspect the mating surfaces and install a new O-ring. Lubricate with clean engine oil.
Install the oil pump screen cover and tube and install the bolts.
3. Install the oil pan.
