Navigator 4WD V8-5.4L DOHC VIN R (2001)
8. Remove the A/C outlet duct.
1
Remove the pin-type retainer.
2
Remove the A/C outlet duct.
9. Remove the auxiliary air conditioning and heater assembly.
1
Remove the three bolts.
2
Remove the auxiliary air conditioning and heater assembly.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the coolant hoses with MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water only, if needed.
2. Perform Evacuation and Charging Procedure. Refer to: Heating and Air Conditioning, Service and Repair, Evacuation and Charging
Procedure, See: Service and Repair/Evacuation and Charging Procedure