Navigator 4WD V8-5.4L DOHC VIN R (2001)
5. Install the inlet line (19835-G).
1
Remove the RH rear wheel and tire.
2
Install the end with the yellow tape between the frame and the body.
6. Connect the inlet line (19835-G) to the inlet line (19835-F).
^
Connect the fitting and loosely install the nut.
7. Install the inlet line (19835-H).
^
Install the end without tape through the floor.
8. Connect the inlet line (19835-H) to the inlet line (19835-G).
1
Connect the line.
2
loosely install the nut.