Navigator 4WD V8-5.4L DOHC VIN R (2001)
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
11. Disconnect the 5/8 inch outlet line peanut fitting that is located outboard of the side rail.
1
Remove the nut.
2
Disconnect the line.
12. Cut the 5/8 inch evaporator outlet line near the A/C tine grommet.
13. Cut the 5/8 inch evaporator outlet line near the rear crossmember.
14. Cut the 5/8 inch evaporator outlet line forward of the rear wheel opening.
