Navigator 4WD V8-5.4L DOHC VIN R (2001)
3. Measure the front suspension from the center line on the nut side of the front bolt on the front suspension lower arm to the ground, and record.
4. Measure the front suspension from the bottom of the front wheel knuckle to the ground, and record.
NOTE: The ride height specification for base vehicles with new suspension components is higher than the specification for vehicles using
original suspension components to allow for new component settling.
5. To obtain the front suspension ride height, subtract the measurement in Step 3 from the measurement in Step 2.
^
If the measurement is out of specification, ride height adjustment is required.
