Navigator 4WD V8-5.4L DOHC VIN R (2001)
6. Connect the heater water outlet line to the heater water outlet line.
1
Connect the fitting.
2
Loosely install the nut.
7. Tighten the three peanut fittings.
8. Install the line brackets.
1
Position the bracket.
2
Install the nut.
^
Snap the line securely into the bracket.
CAUTION:
^
Verify that clearance exists between the frame and the lines to prevent component damage.
^
Overtightening of the nut will cause the stud to break away from the floorpan.
NOTE: The bracket must be positioned equally between the white location marks on the line.
9. Connect the heater water outlet line to the engine heater outlet hose coupling.
^
Lubricate the coolant hoses with MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water only, if needed.
