lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Electrical Specifications|Page 4666 > < Electrical Specifications|Page 4664
Page 1
background image

Fuel Injector: Description and Operation

FUEL INJECTOR

Fuel Injectors

The fuel injector (Figure 69) is a solenoid-operated valve that meters fuel flow to the engine. The fuel injector is opened and closed a constant number
of times per crankshaft revolution. The amount of fuel is controlled by the length of time the fuel injector is held open.

The fuel injector is normally closed and is operated by 12 volt VPWR from the electronic engine control power relay. The ground signal is controlled
by the Powertrain Control Module (PCM).

CAUTION:  Do not apply battery positive voltage (B+) directly to the fuel injector electrical connector terminals. The solenoids may be damaged
internally in a matter of seconds.

The injector is the Deposit Resistant Injection (DRI) type and does not have to be cleaned. However, it can be flow checked and, if found outside of
specification, the fuel injector should be replaced.

Electrical Specifications|Page 4666 > < Electrical Specifications|Page 4664