Navigator 4WD V8-5.4L DOHC VIN R (2001)
2
Separate the seat backrest trim cover side J-clips.
WARNING: FRONT SEAT BACK TRIM COVERS INSTALLED ON SEATS EQUIPPED WITH SIDE AIR BAGS CANNOT BE
REPAIRED, THEY ARE TO BE REPLACED (CLEANING IS PERMISSIBLE).
5. Separate the seat backrest trim cover lower J-clips.
6. Position the seat backrest trim cover back flap up.
7. Separate the side air bag wire harness pin-type retainers from the seat backrest frame.
NOTE: If the pin-type retainers are damaged, install new retainers. This will keep the wire harness routed correctly.
8. Route the side air bag wire harness and connector out from the seat cushion and trim cover.