Navigator 4WD V8-5.4L DOHC VIN R (2001)
3. Install the RCM bolt.
WARNING: THE TIGHTENING TORQUE OF THE AIR BAG RESTRAINT CONTROL MODULE (RCM) BRACKET RETAINING
BOLTS IS CRITICAL FOR CORRECT SYSTEM OPERATION.
4. Connect the battery ground cable.
5. With the restraint system diagnostic tools installed at all deployable devices, prove out the system. See: Air Bag Systems/Air Bag(s) Arming and
Disarming
6. Disconnect the battery ground cable and wait at least one minute.
7. Position the instrument panel lower finish panel. Install the pin-type retainers.
8. Install the console screws (RH and LH side).
9. Install the screws.
