Navigator 4WD V8-5.4L DOHC VIN R (2001)
6. Route the safety belt through the B-pillar trim panel.
^
Install the B-pillar trim panel insert.
NOTE: Position the D-ring to its highest point.
7. Before installing the belt anchor, twist the belt.
8. Using the special tool, install the belt anchor.
^
Install the B-Pillar trim panel, D-ring and cover. See: Air Bag(s) Arming and Disarming/Service and Repair/Air Bag Disarming and Arming
9. Restore the vehicle to operating condition.
1
Reactivate the supplemental restrain system (SRS). See: Air Bag(s) Arming and Disarming/Service and Repair/Air Bag Disarming and
Arming
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES
AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAIN SYSTEM DEACTIVATION/REACTIVATION PROCEDURE.
2
With all the restraint system diagnostic tools removed, prove out the system. See: Air Bag(s) Arming and Disarming
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.
3
Check the active restraint system for correct operation.