Navigator 4WD V8-5.4L DOHC VIN R (2001)
Alignment: Service and Repair
Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake
pedal.
3. Check the toe settings; follow the manufacturer's instructions.
4. Hold the tie-rod end while loosening the toe set jam nuts.
5. Rotate the front wheel spindle tie-rod adjusting sleeve to desired position.
6. NOTE: Whenever the toe set jam nuts are loosened for toe adjustment, the nut and tie-rod threads must be cleaned and lubricated.
Tighten the jam nuts as follows:
