Navigator 4WD V8-5.4L DOHC VIN R (2001)
Level Control Solenoid Valve: Service and Repair
Solenoid Valve - Non-Functional
Removal
WARNING: Do not remove an air spring under any circumstances when there is pressure in the air spring. Do not remove any components
supporting an air spring without either exhausting the air or providing support for the air spring to prevent vehicle damage or personal
injury.
NOTE: The air spring solenoid has a two-stage pressure relief fitting similar to a radiator cap.
1. Raise and support the vehicle.
2. Disconnect the air spring solenoid electrical connector.
3. Disconnect the air spring solenoid air line.
^
Compress the quick connect locking ring and pull out the air line.
4. CAUTION: Remove any dirt or other debris from the air spring prior to removing the air spring solenoid from the air spring.
Remove the air spring solenoid clip.