Navigator 4WD V8-5.4L DOHC VIN R (2001)
5. Remove the lower shock absorber nut, bolt and the shock absorber.
Installation
1. WARNING: Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the
wheel hub, brake drum or brake disc that contacts the wheel. Installing wheels without proper metal-to-metal contact at the wheel
mounting surfaces can cause the wheel nuts to loosen and allow the wheel to come off while the vehicle is in motion, causing loss of
control.
NOTE: Tighten the wheel nuts in the sequence.
To install, reverse the removal procedure.