Navigator 4WD V8-5.4L DOHC VIN R (2001)
4. Remove the torsion bars.
1
Remove the torsion bar crossmember support bolts and nuts.
2
Remove the torsion bar crossmember support.
3
Remove the torsion bars.
Installation
1. Install the torsion bar.
1
Position the torsion bars.
2
Position the torsion bar crossmember support.
3
Install the torsion bar crossmember support bolts and nuts.
2. Load the torsion bar.
1
Install the torsion bar adjuster. Turn the torsion bar adjuster until the reference marks align.
2
Install the Torsion Bar Tool with the Torsion Bar Tool Adapters in the B slots on the Torsion Bar Tool.