lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Cooler Bypass Valve|Page 5112 > < Cooler Bypass Valve|Page 5110
Page 3
background image

2. CAUTION:  Damage will occur to the rubber-coated sealing washers and transmission fluid will leak if the cooler line case fitting are

overtightened.

NOTE:  Align the rubber-coated sealing washers while installing CBV assembly on the transmission case.

Install the CBV assembly.

3. Install the fluid cooler tubes in the front and rear cooler line case fittings.

4. CAUTION:  Install a new inline transmission fluid filter (XC3Z-7B155-BA) every 48,000 km (30,000 miles) and always as part of a transmission

overhaul or exchange. If the vehicle was not equipped with an inline fluid filter, install a new inline transmission fluid filter kit
(XC3Z-7BLC,5-AA) according to the instructions supplied with the kit as part of a transmission overhaul or exchange.

CAUTION:  Failure to follow the instructions supplied with the inline transmission fluid filter kit can cause transmission damage.

CAUTION:  Verify that the flow arrow on the filter points toward the transmission. 

Cooler Bypass Valve|Page 5112 > < Cooler Bypass Valve|Page 5110