Navigator 4WD V8-5.4L DOHC VIN R (2001)
Install a new inline transmission fluid filter (XC3Z-7B155-BA). If the vehicle was not equipped with an inline fluid filter install a new inline
transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with the kit. Carry out the transmission fluid cooler flow test
procedure to verify that there is correct fluid flow through the new inline fluid filter.
5. Lower the vehicle.
MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per TSB 06-14-4.
Fill the transmission with the specified type and quantity of transmission fluid.
-
Use Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent meeting MERCON specifications.
6. Check for leaks.
7. If equipped with air suspension, reactivate the system by turning on the air suspension switch.
