Navigator 4WD V8-5.4L DOHC VIN R (2001)
disconnect the yoke from the flange. Pry on in the area shown, with a suitable tool, to disconnect the yoke from the flange.
Using a suitable tool as shown, disconnect the driveshaft flange yoke from the pinion flange. Wire the driveshaft out of the way.
6. Disconnect the electrical connector.
7. Disconnect the parking brake cable and conduit from the rear wheel disc brake adapter.
^
Repeat for the other side.
8. Remove the rear disc brake caliper and position it out of the way.
^
Repeat for the other side.
9. Remove the brake disc.
^
Repeat for the other side.
