Navigator 4WD V8-5.4L DOHC VIN R (2001)
Installation
1. WARNING: Use extra straps to secure the rear axle to the jacks Failure to follow these instructions may result in personal injury.
Using a suitable hydraulic jack, raise the rear axle into place.
2. Position the rear suspension upper front arm and bushing and install the bolt and nut.
^
Repeat for the other side.
3. Position the rear suspension arm and bushing and install the bolt and nut.
^
Repeat for the other side.
4. Raise the rear axle with the jack until the rear suspension arm and bushings are parallel to the ground and install the bolt and nut retaining the
shock absorber to the axle.
^
Repeat for the other side.
