Navigator 4WD V8-5.4L DOHC VIN R (2001)
CAUTION: The driveshaft flange yoke fits tightly on the pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten the
bolts evenly in a cross pattern as shown.
Position the driveshaft flange yoke on the pinion flange with the index marks aligned, and install the bolts.
14. Lower the vehicle partially.
15. Install the jounce bumper.
^
Repeat for the other side.
16. Install the parking brake rear cable and conduit.
^
Repeat for the other side.
17. Install the brake disc.
^
Repeat for the other side.
18. Install the rear disc brake caliper.
^
Repeat for the other side.
19. Install the rear wheel and tire assemblies.
