Navigator 4WD V8-5.4L DOHC VIN R (2001)
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the axle shaft.
Installation
1. Lubricate the lip of the wheel bearing oil seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the axle shaft.
CAUTION: Do not damage the rubber O-ring in the axle shaft groove.
3. Install the U-washer.
1
Position the U-washer on the button end of the axle shaft.
2
Pull the axle shaft outward.