lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seals and Gaskets, Transfer Case|Service and Repair|Page 5714 > < Torque on Demand Relay|Page 5710
Page 1
background image

Seals and Gaskets: Service and Repair

Seal Oil, Rear 

Special Tool(s) 

Removal 

1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This

can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in unexpected inflation
or deflation of the air springs, which can result in shifting of the vehicle during these operations. 

Raise and support the vehicle. 

2. NOTE:  Index-mark the rear driveshaft yoke and pinion flange to maintain initial driveshaft balance during installation.

Remove the rear driveshaft. 

3. Using a suitable tool, remove the oil seal.

Installation 

Seals and Gaskets, Transfer Case|Service and Repair|Page 5714 > < Torque on Demand Relay|Page 5710