Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
2. CAUTION: Make sure to install a new sensor grommet or an air leak can occur.
NOTE: Do not remove the valve stem core to relieve the tire pressure.
The above illustration and table indicates parts making up the tire pressure monitoring sensor assembly.
3. CAUTION: If the valve stem core has been removed from the valve stem, reinstall the original valve stem core. If the original valve stem core is
damaged, a nickel-plated core must be installed. Failure to use a nickel-plated core will result in corrosion and the Possible loss of tire pressure.
NOTE: Release the tire pressure by removing the sensor retaining nut.
With the valve stem at the 6 o'clock position, remove the sensor retaining nut and push the sensor by hand into the tire (with the cap on).